KARAKTERISTIK RAVELLING RESISTANCE, MOISTURE SENSITIVITY, DAN WORKABILITY LASTON AC-WC DENGAN BAHAN TAMBAH POLIVINIL KLORIDA (PVC)

Ayu Kamila Khanza; Michael Michael; Helmi Maulana Ramadan

doi:10.59003/nhj.v5i3.1655

Authors

Ayu Kamila Khanza Institut Teknologi Sumatera
Michael Michael Institut Teknologi Sumatera
Helmi Maulana Ramadan Institut Teknologi Sumatera

DOI:

https://doi.org/10.59003/nhj.v5i3.1655

Keywords:

Aspal Beton Lapis Aus (AC-WC), Polivinyl Klorida (PVC), Ravelling Resistance, Moisture sensitivity, Workability

Abstract

This study aims to evaluate the effect of 4% waste addition on the characteristics of the asphalt concrete wearing course (AC-WC) mixture, including raveling resistance, moisture sensitivity, and workability. The study used a dry mix method with 60/70 penetration asphalt, according to the 2018 General Specification of Bina Marga Division 6. The results showed an increase in mixture performance in the Tensile Strength Ratio (TSR) value increasing from 95.10% to 99.86%, and Cantabro Loss decreasing from 5.16% to 3.47%. Workability testing showed that the Void in Mix (VIM) value in the PVC mixture was higher than the control in each impact variation (5–100), indicating that the control was easier to compact. VIM increased in the 5th impact from 14.530% to 15.316% and in the 100th from 3.409% to 4.617%, indicating a slight decrease in compaction ease. This condition occurs because PVC has a relatively high melting point and a rigid molecular structure, so during the compaction process, the PVC particles do not fully soften with the flow of asphalt, which causes more air voids to remain. Overall, the addition of PVC has been shown to effectively increase wear resistance and moisture resistance, with a slight increase in compaction ease.

Downloads

Download data is not yet available.

References

Amin, C., & Arif, S. (2023). Pengaruh Penambahan Limbah Plafon Pvc Terhadap Karakteristik Campuran Aspal Beton Ac-Wc. Narotama Jurnal Teknik Sipil, 7 (2).

Arshad, A. K., & Alam, S. (2019). Relationship Between Workability And Moisture-Induced Damage of Asphalt Concrete Mixtures. International Journal of Civil Engineering and Technology, 1 (3), 1887-1894.

Behiry, A. E.-M. (2016). Laboratory Evaluation Of Resistance To Moisture Damage in Asphalt Mixtures. Ain Shams Engineering Journal, 351-363.

Cheng, Z., Zheng, S., Liang, N., Li, X., & Li, L. (2023). Influence Of Complex Service Factors On Ravelling Resistance Performance For Porous Asphalt Pavements. Building, 1-17.

Cieng, Z., & Zheng, S. (2023). Influence Of Complex Service Factors On Ravelling Resistance Performance For Porous Asphalt Pavements. Buildings, 323.

Gao, B., Xu, H., Wu, S., Wang, H., Yang, X., & Chen, P. (2024). Research On Improving Moisture Resistance Of Asphalt Mixture With Compounded Recycled Metallurgical Slag Powders. Materials, 1-16.

Gunarto, A., & Candra, A. I. (2019). Penelitian Campuran Aspal Beton Dengan Menggunakan Filler Bunga Pinus. Ukarst, 3, 47-48.

Hanssel, A. (2022). Karakteristik Campuran Ac-Bc Dengan Menggunakan Bahan Tambah Plastik Pvc. Jurnal Teknik Sipil Ukipaulus-Makassar, 680.

Jamshidi, A., White, G., & Hasan, M. R. (2022). New Methodology To Characterize The Workability Of Asphaltic Concrete Mixtures Based On Kinematic Compaction Energy. Sustainability, 1-18.

Kaliky, H. B., Walsen, S., & Jakob, J. C. (2024). Analisis Kerusakan Perkerasan Jalan Dan Estimasi Biaya Perbaikan Pada Ruas Jalan Amanhuse Kota Ambon. Jurnal Penelitian Multidisiplin Bangsa, 82.

Liu, L., Lingxiao Liu, & Yu, Y. (2023). Study Of Factors Influencing Moisture Susceptibility Of Warm-Mix Asphalt Using The Surface Free Energy Approach. Polymers, 1-15.

Lu, D. X., Enfrin, M., Masood, H., & Giustozzi, F. (2024). Performance Evaluation of Post-Consumer and Post-Industrial . Recycled Plastics as Binder Modifier in Asphalt Mixes, 3-14.

M. R., Alpius, & C. K. (2022). Pemanfaatan Limbah Plastik Pvc Sebagai Bahan Tambah Pada Campuran Ac-Wc. Paulus Civil Engineering Journal (Pcej), 4 (4).

Mabui, D. S., Tjaronge, M. W., Adisasmita, S. A., & Pasra, M. (2019). Resistance To Cohesion Loss In Cantabro Test On Specimens Of Porous Asphalt Containing Modificated Asbuton. Earth and Enviromental Science , 1-7.

Maharani, A., & Wasono, S. B. (2018). Perbandingan Perkerasan Kaku Dan Perkerasan Lentur (Studi Kasus Ruas Jalan Raya Pantai Prigi-Popoh Kab. Tulungagung). Jurnal Perencanaan Dan Rekayasa Sipil , 3.

Nataadmadja, A. D., Prahara, E., Setyandito, O., & Ananditha, R. W. (2019). Evaluation Of Moisture Susceptibility Of Hot Mix Asphalt. AIP Confrence Proceedings, 1-8.

Padhan, R. K., Panda, M., & Jena, T. K. (2021). Chemically recycled polyvinyl chloride as a bitumen modifier: Synthesis, characterisation and performance evaluation. Road Materials and Pavement Design, 22 (5), 1201-1215.

Pitanova, T., & Alva, S. (2023). Karakteristik Mekanikal Material Polimer Pvc Dengan Variasi Konsentrasi Vco. Jurnal Pendidikan Dan Konseling, 5 (1), 4423.

Priana, S. E. (2018). Analisa Faktor Penyebab Kerusakan Jalan (Studi Kasus Ruas Jalan Lingkar Utara Kota Padang Panjang). Rang Teknik Journal.

Rante, M., Alpius, & Kamba, C. (2022). Pemanfaatan Limbah Plastik Pvc Sebagai Bahan Tambah Pada Campuran Ac-Wc. Jurnal Teknik Sipil Ukipaulus-Makassar, 535-544.

Rasul, R. F., & Sari, Y. A. (2022). Pengaruh Penambahan Limbah Serbuk Pvc Pada Campuran Laston Lapis Aus. Jurnal Ilmiah Rekayasa Sipil, 128.

Rinaldi, H. (2016). Perkerasan Campuran Aspal Ac-Wc Dengan Material Lokal. Jurnal Teknik Sipil, 1 (1).

Sa'dillah, Oktaviastuti, B., & Nenabu, C. (2020). Karakteristik Penggunaan Plastik PVC (Polyvinyl).

Salman, N. D., & Abbas, N. S. (2025). Optimizing Hot Mix Asphalt Performance With Recycled Pvc From Construction Waste. Civil And Environmental Engineering, 1-12.

Saputra, O., & R, P. T. (2010). Perencanaan Campuran Aspal Beton Dengan Menggunakan Filler Tanah. Jurnal Teknik Sipil, 1 (9).

Saputro, D. T. (2022). Pengaruh Proses Pencampuran Kering Dan Basah Terhadap Kekesatan Ac-Wc Limbah Plastik. Jurnal Transportasi, 22, 97-108.

Simangunsong, J. E., Alkas, M. J., & Wati, A. (2021). Pemanfaatan Limbah Plastik Pet Sebagai Bahan Tambah. Jurnal Teknologi Sipil, 5 (2).

Srihatyani, L., & Septiadi, D. (2024). Penambahan Zat Additive Anti Stripping Agent Dan Filler Serbuk Pvc Pada Campuran Aspal Ac-Wc.

Sulandari, E., Lestyowati, Y., Felderika, & Sutarno. (2024). Analisis Pengaruh Sifat Volumetrik Pada Campuran Aspal Ac-Wc. Crane : Civil Engineering Research Journal, 5 (2), 41-48.

Susanto, H. A., Merdiana, K., & Indriyati, E. W. (2021). Pengaruh Penambahan Limbah Plastik Polypropylene (Pp) Terhadap Кетанanan Ravelling Campuran Asphalt Concrete Wearing Course (The Effect Of Waste Polypropylene (Pp) Plastic Tо The Ravelling Resistance Of Asphalt Concrete Wearing Course Mixes). Jurnal Jalan-Jembatan, 38 (2), 86-109.

Susanto, H. A., Mulyono, B., Widyaningrum, A., & Purnomo, W. H. (2023). Kinerja Perkerasan Aspal Berpori Dengan Campuran Limbah Plastik Dan Karet (The Performance Of Porous Asphalt Pavement Using Rubber And Plastic Waste). Jurnal Jalan-Jembatan, 40 (1), 32-43.

Veranita, Djamaludin, R., Satria, A., & Supardi, J. (2021). Strategi Penanganan Lubang Jalan Menggunakan Pvc Dan Abu Sekam Padi Sebagai Penerapan Inovasi Teknologi(Jalan Ujung Berasok –Desa Lapang). Jurnal Pengabdian Masyarakat: Darma Bakti Teuku Umar, 3 (2).

Widianty. (2022). Pengaruh Viskositas Aspal Modifikasi Limbah Styrofoam Dan Limbah PVC Terhadap Sifat Volumetrik Campuran Laston. Spektrum Sipil, 9 (2), 111-118.

Widjajakusuma, J., Daniel, C. G., & Tenardy, D. I. (2023). Kajian Moisture Sensitivity Campuran Aspal Hangat Dengan Bahan Tambah Polimer Ethylene-Vinyl Acetate (Eva). Konteks Ke-17, 270-279.

Yuniarti, R., & Alit, I. (2021). Pengaruh Penetration Index Terhadap Karakteristik Marshall Laston Menggunakan Limbah Styrofoam Dan Pvc. Siklus: Jurnal Teknik Sipil.